The warning signs are always there. The sink is slower to drain. Water starts to pool around your feet as you shower. Pungent odors start polluting your nostrils. Despite these signs, you don’t take action until one day your drain is completely blocked.
A blocked drain is a troublesome issue. Fortunately, there are various ways in which it can be fixed. Below are four methods to unclog a blocked drain.
- Hire a plumber
It is not always be the cheapest option, but it is the easiest and most effective. Even though you may want to have a go at fixing the issue on your own, it is advised that you hire a plumber to do the job on your behalf. Plus, if they can catch an issue early before it turns into a major problem, you might end up saving money overall.
When you pick a local plumber, always remember to do your research. You do not want to end up with a cowboy that charges four times the price the service should cost or someone that does not fix the issue. Hiring a reputable 24hour emergency plumber will ensure that you have a professional see to your problem in no time.
- Wire hanger
A standard wire coat hanger might not seem like the best tool to use, but it is surprisingly effective. Take the hanger and straighten it out. Now fold over a small section of the wire at one end, creating a hook. Now you have your own makeshift fishing tool. Place this down the drain, and you will be able to pull out hair and other gunk that is causing your blockage issue.
If you don’t want to ruin a good wire hanger, you could use a specially designed drain snake to do the job.
- Boiling water
If you’re searching for the method that requires the least amount of effort, you have landed on the right section. All you have to do is flick the kettle on, boil up some water, and slowly pour it down the drain. It is advised to do this in two or three phases, giving each batch of hot water a few seconds to work before pouring in more.
- Salt and baking soda
Now, this article is venturing into the home remedy stage. However, combining salt and baking soda is one of the more effective methods of unclogging a drain DIY-style.
As for the ‘recipe’, grab a 1/2 cup of table salt. Add this to half a cup of baking soda and mix the two ingredients together. Now pour this mixture down the troublesome drain. Leave it alone for about 15-20 minutes so it can start working its magic. Now add the final ingredient: boiling water.
That is right; boiling water is back to help. When this water combines with the salt and baking soda concoction, it leads to a chemical reaction, which helps dissolve some of the nasties that cause blockages.