6 things to know about LEDs in the warehouse

6 things to know about LEDs in the warehouse

Efficient LED light sources are changing the way we look at high bay lighting in warehouses and distribution centers, but there are some important factors that cannot be ignored. Of course, there are obvious considerations. Energy efficiency and operating costs are always priorities, and high-end equipment maintenance is often a logistical nightmare. LED solutions seem to make sense, but there are additional special challenges in warehouse lighting. In this article, you will know What is Warehouse LED Lighting? Let’s read together…

Get the right design

It may seem simple, but installation doesn’t always happen with installed tracking systems. The light fixture above the shelf is useless. Before letting the electrician get lost in the installation process, make sure you know where the shelving needs to go. Improperly placed lighting equipment wastes energy, placing lights in the wrong location can severely reduce lighting levels and make maintenance an unnecessarily expensive and time-consuming process. Of course, this doesn’t just apply to LED installations, but the light distribution of LED high bays may not be as forgiving as the types of HID light sources we’re used to.

Checking LED System Optics

The new generation of high bay lighting relies on the use of optical systems to transmit its light patterns. If you decide to take advantage of what optics offers, make sure to install the correct version. Getting the light into the ground is easy, but the operator needs to wash the light well on the vertical side of the rack. This is one of the major improvements that LED light sources to bring to high bay lights.

“Traditional” high-bay luminaires used to use elliptical HID lamps in rotating aluminum reflectors, providing a wide cone of light, while LED high-bay luminaires vary in shape, from a central high-output module within the reflector, replicating older HIDs version, to a linear array style with a defined asymmetric distribution, suitable for cleaning vertical surfaces.

Avoid glare for forklift drivers

LED arrays do not work like traditional HID light sources. The spot intensity of each LED chip can make glare a serious problem if the operator is forced to look up at the surface of the luminaire. This is a typical problem when forklift drivers need to stack products at higher rack heights. There is a necessary trade-off between luminaire efficiency and visual comfort. Warehouse Lighting for Sale has a lot of devices you can get by clicking on this link.

LED high bay lights may report excellent luminous efficiency but may rely on poor optical control to achieve that number. A good optical system takes into account the needs of the person working under the luminaire and may sacrifice a certain degree of efficiency.

You do not have to be present

Sometimes 100% task lighting is not required. LED installations should be efficient in any case, but this is no reason not to take advantage of the technical properties of the light source. While HID dimming was never really a viable option, LEDs can easily be dimmed.Using a local presence detector can help reduce power consumption when a particular bay is not in use. If you have ceiling lights, you can save even more energy by combining lighting with daylight control.

Stay informed about what’s going on

Unless you have some form of monitoring software, you won’t know how efficiently the facility is running. Combining a powerful lighting control strategy with reporting software gives you all the feedback you need to understand how your facility is performing. We are more used to seeing this kind of automated testing and reporting with emergency lighting. However, a thorough analysis of lighting installations that work at heights and for long periods of time can bring various benefits in preventive maintenance.

You know what’s going to happen next

The warehouse can operate 24/7, which means an LED array of about 50,000 hours has a lifespan of less than seven years. Make sure that when that day comes, the designated device can be re-installed with a new LED array and driver. The lifetime assessment of an LED installation should include the manufacturer’s statement of intent when replacing internal components. This is relatively new territory for manufacturers. The importance of LED life is so high that it took some time to discuss the truth of the matter. LEDs won’t last forever, but light fixture enclosures can.

Janet Brown

Hi, I am Janet Brown. I enjoy drawing paintings and watching movies in my free time. I also love to travel and explore new places and learn new things. I am fond of writing and reading.